How to setup Waba (Cyneva)

Install Metamask on your phone. Click here to download

Click on the browser button.

 

 

In the top. Visit: https://portal.wabanetwork.org/dashboard

 

 

Press Connect Wallet

 

 

Select MetaMask

 

Press Connect

 

Press Confirm

 

You will arrive at a broken webpage.

 

 

Again, visit: https://portal.wabanetwork.org/dashboard

 

You should be here now.

 

Scroll down and click "add a device"

 

Press Next

 

Set your location then press Next

 

Now plug your Waba into an outlet and make sure the blue led on the power button is flashing, if not hold it for 6 seconds until it starts to.

 

Back into the App You will be at this screen, open your wifi on the phone and connect to the Cyneva network that pops up.

 

 

Return back to the app after the wifi connection is successful. You will see your device id. Copy it.

If you are having trouble connecting. The Waba only supports 2.4ghz, WPA2 and passwords without special characters such as -!,/

 

Again, visit: https://portal.wabanetwork.org/dashboard

You should be here now.

 

Scroll down and click "add a device"

 

Press Next

 

Set your location then press Next

You should see a place to enter the device name and ID. The ID is the digits you copied earlier. Fill it out then press Next.

If you see Connected you are done!