How to Setup Soarchain Mini? A Step-by-Step Guide

The Soarchain Mini transforms any vehicle into a data-sharing hub, contributing to a decentralized network that helps create safer and more efficient transportation systems. Plus, you’ll earn rewards by sharing anonymous data while driving.

Here’s what you’ll need to get your Soarchain Mini set up:

• Your phone
• The Soarchain Mini
• The box and lid it came in
• Your car

In this article, we'll show you how to set up your Soarchain Mini in a few simple steps so you can connect your car in no time!

iOS Setup Guide

Before getting started, here's what you need to do:

1. Make sure your phone is using your SIM card’s cellular network.
2. Turn on Cellular Data on your phone.

3. Enable Bluetooth.

4. Switch on your Personal Hotspot.

5. Set your Personal Hotspot to "Maximize Compatibility" for a smoother setup.
6. Disconnect from any other hotspots or Bluetooth devices while setting up.

Wallet Creation in Soarchain Connect

To create your wallet in the Soarchain Connect app, here’s what you need to do:

1. Download the Soarchain Connect app and create a new wallet.

Already have a wallet? Just sign in with it or import it by entering your 24-word passphrase.

2. You’ll get 24 seed words when you create a wallet. These are your key to the wallet, so make sure you write them down correctly and store them somewhere safe.

⚠️ Important:

Never share your 24 seed words with anyone—not even the Soarchain team.

Losing these words means losing access to your account and Soarchain Mini forever. The Soarchain team can’t recover them for you.

3. After you’ve written down your seed words, you’ll be asked to reenter them in the app to complete the setup.

Remember, the wallet you create in the Soarchain Connect app is your unique Soarchain wallet. Don’t import any other crypto wallets into this app!

Plug Your Soarchain Mini to Your Car

Here’s how to plug in your Soarchain Mini:

1. Find your car’s OBD2 port. It’s usually located under the steering wheel, on the left side of the driver’s seat.
2. Plug the Soarchain Mini into that port.
3. Look for the red LED light—when it lights up, you’ll know the device is powered on and ready for the next steps.

Registration - Install the Provisioning App

Here’s how to register and install the provisioning app:

1. After setting up or importing your wallet, go to the Dashboard in the Soarchain Connect app.
2. Tap the "Register a Soarchain Device" button and follow the steps in the app.
3. When prompted, you’ll need to provision your Soarchain Mini. This means connecting it to your phone’s hotspot network so it has internet access.
4. The provisioning process only needs to be done once unless you change your phone or hotspot settings.
5. During registration, the app will ask you to download the Soarchain Provisioning app. Just hit "Download," and grab it from the App Store.

How to Provision Your Soarchain Mini

Provisioning connects your Soarchain Mini to your phone’s hotspot so it can get online. Before starting, make sure your Cell Data and Personal Hotspot are switched on.

1. Open the Soarchain Provisioning app after downloading it.
2. Read through the instructions carefully.
3. Grab your Soarchain Mini box and find the QR code inside the top lid.
4. Use the Provisioning app to scan the QR code.
5. You’ll see a list of nearby Wi-Fi networks—pick your phone’s personal hotspot from the list. If you don’t see it, hit the refresh button in the top right corner.
6. Enter your hotspot password (double-check it before you type it in to avoid having to reset).
7. After entering the password correctly, a success message will pop up.
8. Check that your Soarchain Mini is connected to your phone’s hotspot.
9. Once that’s confirmed, close the Provisioning app and head back to the Soarchain Connect app to finish the setup.

Final Checks 

After you’ve finished provisioning, close the Soarchain Provisioning app and return to the Soarchain Connect app. Tap the "Already Provisioned" button, then wait on the Registration Checks screen while your device performs its final checks. Once the "Register Device" button turns blue, press it to complete the setup.

Earning Rewards

Once your device is registered, you’ll have full access to all the Soarchain Connect app features and start earning tSOAR tokens. Here’s what you need to keep in mind to keep those rewards coming:

1. Make sure your Soarchain Mini stays plugged into your car while you’re driving.
2. Keep your phone’s personal hotspot enabled and linked to the Soarchain Mini.
3. The Soarchain Connect app should be running while you drive—it works in the background but don’t fully close it.

Android Setup Guide

Here’s how to get your Android phone ready for the Soarchain Mini setup:

1. First, ensure your phone uses your SIM card’s cellular network.

2. Turn on Cellular Data in your phone’s settings.

3. Enable Bluetooth on your phone.

4. Switch on your Personal Hotspot to allow your Soarchain Mini to connect.

5. Make sure you're disconnected from any other hotspots or Bluetooth devices during the setup.

Wallet Creation in Soarchain Connect

To create your wallet in the Soarchain Connect app, here’s what you need to do:

1. Download the Soarchain Connect app and create a new wallet.

Already have a wallet? Just sign in with it, or import it by entering your 24-word passphrase.

2. You’ll get 24 seed words when you create a wallet. These are your key to the wallet, so make sure you write them down correctly and store them somewhere safe.

⚠️ Important:

Never share your 24 seed words with anyone—not even the Soarchain team.

Losing these words means losing access to your account and Soarchain Mini forever. The Soarchain team can’t recover them for you.

3. After you’ve written down your seed words, you’ll be asked to reenter them in the app to complete the setup.

Remember, the wallet you create in the Soarchain Connect app is your unique Soarchain wallet. Don’t import any other crypto wallets into this app!

Plug Your Soarchain Mini to Your Car

Here’s how to plug in your Soarchain Mini:

1. Find your car’s OBD2 port. It’s usually located under the steering wheel, on the left side of the driver’s seat.
2. Plug the Soarchain Mini into that port.
3. Look for the red LED light—when it lights up, you’ll know the device is powered on and ready for the next steps.

Registration - Install the Provisioning App

Here’s how to register and install the provisioning app:

1. After setting up or importing your wallet, go to the Dashboard in the Soarchain Connect app.
2. Tap the "Register a Soarchain Device" button and follow the steps in the app.
3. When prompted, you’ll need to provision your Soarchain Mini. This means connecting it to your phone’s hotspot network so it has internet access.
4. The provisioning process only needs to be done once unless you change your phone or hotspot settings.
5. During registration, the app will ask you to download the Soarchain Provisioning app. Just hit "Download," and grab it from the App Store.

How to Provision Your Soarchain Mini

Here’s how to provision your Soarchain Mini step by step:

Provisioning connects your Soarchain Mini to your phone’s hotspot, giving it the internet access it needs. Before you start, make sure Cellular Data and Personal Hotspot are both turned on.

1. Open the Soarchain Provisioning app.
2. Take a minute to read the instructions before starting.
3. Grab your Soarchain Mini box and find the QR code inside the top lid.
4. Use the app to scan that QR code.
5. You’ll see a list of nearby Wi-Fi networks. Pick your phone’s personal hotspot from the list. If you don’t see it, hit the refresh button in the top right.

Your phone’s hotspot name is the same as your phone’s name under Settings > Connections > Mobile Hotspot & Tethering > Mobile Hotspot (the exact location might vary depending on your phone).

6. Enter your hotspot password (double-check it before submitting to avoid a reset).
7. Once the password is in correctly, you’ll get a success message.
8. Make sure your Soarchain Mini is connected to your phone’s hotspot.
9. When that’s all done, close the Soarchain Provisioning app and go back to the Soarchain Connect app to finish up.

Final Checks 

Once you’ve completed provisioning, close the Soarchain Secure Provisioning app and go back to the Soarchain Connect app. Tap "Already Provisioned," then wait while the Registration Checks screen completes the final setup for your device. When the "Register Device" button turns blue, press it to finish the registration process.

Earning Rewards

After registration, you’ll unlock all the Soarchain Connect app features and earn tSOAR tokens. Here’s what you need to do to keep earning rewards:

1. Keep the Soarchain Mini plugged into your car while you’re driving.
2. Make sure your phone’s personal hotspot is on and connected to the Soarchain Mini.
3. Ensure the Soarchain Connect app is running while you drive—it works in the background but shouldn’t be fully closed.

Troubleshooting Tips

Here are some quick fixes for common issues you might face during setup:

• Lost QR code sticker: If you’ve misplaced your QR code, contact support on the Soarchain Discord server to get a digital copy. Instructions on submitting a ticket are covered under "Ticketing and Customer Support."
• Can't find the OBD2 port: The OBD2 port is usually under the steering wheel, but some vehicles may have it in a compartment. Check your car’s manual or ask your vehicle manufacturer for help.
• No red light on Soarchain Mini: If the red LED isn’t on, try unplugging and reconnecting the device. If it still doesn’t light up, test it in another vehicle. If needed, reach out to support on the Soarchain Discord server.
• QR code won’t scan: Make sure the QR code is clear and properly aligned with your phone’s camera. Ensure Bluetooth is enabled and no other devices are connected. If it’s already provisioned, check your phone’s settings.
• Device not showing on hotspot: If your Soarchain Mini isn’t connecting to your phone’s hotspot, go to "Settings > Personal Hotspot" and wait for it to reconnect. If that fails, do a provisioning reset by holding the device’s button for 6 seconds while connected, then restart the setup process.
• Firmware update issues: The device automatically updates when connected to a hotspot. Keep the Soarchain Connect app open during the update, and don’t disconnect the device or disable your internet. The device will reset after the update, so make sure it reconnects before continuing.
• Changed hotspot settings: If you change your hotspot name or password, the device won’t connect. You’ll need to reset the provisioning and re-enter the new information. Hold the device's button for 6 seconds to reset and restart the setup.

Ready to turn your car into a smart, connected vehicle and start earning rewards while you drive? Grab your Soarchain Mini now and get set up in a few minutes. 

It’s easy to install, works with any car, and helps make your driving experience smarter and safer. Don’t miss out—get yours today!