HD OpenClaw
Meet the HD OpenClaw — your personal AI assistant, ready out of the box. It takes care of your day‑to‑day, and connects straight to your miner through the terminal. Open the Control UI, follow the guided onboarding, and start your first chat — no setup required.
Plug in your miner. Diagnose it instantly.
Connect your Helium Deploy miner to the HD OpenClaw over USB or your local network, open the terminal, and let your assistant run a full health check — right here on the device.
$ hd openclaw diagnose --miner
→ Scanning local network & USB…
✔ Miner detected: NerdQX (8TH/s) @ 192.168.1.42 · SN NQX-8TH-00427
✔ Matched to Shopify order #48213
✔ Firmware: ESP-Miner v2.1.9 — up to date
✔ Hashrate: 7.94 TH/s (99.3% of rated)
✔ Chip temp: 61°C (nominal)
⚠ Fan 2 at 78% — recommend airflow check
Diagnosis: Healthy · 1 advisory · report saved to ~/hd/reports
Illustrative diagnostic output. Live results depend on your connected hardware.
Serial → Order Linking & Auto‑RMA
OpenClaw maps every miner to its Shopify order by serial number. The moment a miner throws errors, it auto‑drafts a pre‑filled RMA in Shopify — with the diagnostic logs already attached. A support ticket that resolves before the customer even writes in.
→
→
Auto‑drafted RMA
Fan fault · logs attached
Draft ready for 1‑click approval
Your Personal AI Assistant Hub
- HD OpenClaw Pre‑Installed
Ready to go out of the box. Set up Windows, follow the guided onboarding, and start your first chat in minutes.
- Connect Your Miner Through the Terminal
Plug your Helium Deploy rig in and manage it straight from the terminal — monitor hashrate, check status, push commands, run diagnostics, and automate your fleet from one always‑on hub.
- Serial‑to‑Order Linking & Auto‑RMA
Every miner is mapped to its Shopify order by serial number. Faults auto‑draft a pre‑filled RMA with diagnostic logs attached — resolved before the customer writes in.
- Takes Care of Your Day‑to‑Day
Ryzen 3 4300U with 16 GB DDR4 — built for an always‑on AI workload: automation, research workflows, dashboards, and multitasking.
Connect up to three 4K@60 Hz monitors via HDMI 2.0, DisplayPort 1.4, and USB‑C (DP Alt Mode). Perfect for productivity.
Ships with conservative defaults and a printed security checklist. Pairing/allowlist setup keeps your assistant private and controlled.
Pre‑configured for the officially recommended WSL2 setup on Windows 11 Pro. Node 22+ requirement handled — updates align with upstream docs.
Gigabit Ethernet for stable always‑on connections, plus Wi‑Fi 5 and Bluetooth 4.2. VESA mount + screws included for clean desk setups.
Technical Specifications
-
Processor: AMD Ryzen 3 4300U (2.7–3.7 GHz)
-
RAM: 16 GB DDR4
-
Storage: 256 GB M.2 SSD or 1 TB M.2 SSD
-
OS: Windows 11 Pro + WSL2 Path
-
Software: HD OpenClaw Pre‑Installed
-
Display Output: Triple 4K@60 Hz (HDMI 2.0 + DP 1.4 + USB‑C)
-
Ethernet: Gigabit LAN (1 GbE)
-
Wi‑Fi: Wi‑Fi 5 + Bluetooth 4.2
-
Mounting: VESA Mount Included
Model/provider credentials required. Connect to Anthropic, OpenAI, or other providers via API keys or OAuth. Provider subscription not included.
