This guide will show you how to setup the Nubila Marco.
1) Download the app. Android | iOS
2) Open the unit and charge it. Don't use the solar panel right away, you will charge it first with a regular usb power supply. The solar panel only tops it off once charged. You will see a blue led on the top start to pulse.
3) Open the app, make an account and then press the + on top left corner
4) Press the + again.
5) Blow on the spinning part on the top. This will wake the unit so it can be found in bluetooth, then press Next.
6) Your Nubila Marco should appear, tap on it then press connect.
7) Connect it to your WiFi network.
8) Pick a name for the device and press save. That's it you are done the setup!
The next steps would be to place your device outside somewhere close enough to your wifi connection and has enough sun to keep the unit charged with the solar panel. You can also hardware the device if you don't wish to use the solar panel.