Setup & how-to
How To Fix a NerdQaxe++ Rev6.1 Running Lower Than 6TH/s
Follow each step below to complete the guide.
Guide progress
1 / 5
Step 1
Visit the Dashboard.
Go to the IP on the device screen. Type it into your web browser.
Step 2
Press settings.
Step 3
Scroll down.
Stop when you see the Mining Settings.
If you see the Frequency is set to 600 and core voltage set to 1150. This could be the issue!
Then press on the ⚠️ button.
Step 4
Set new values.
The NerdQaxe++ Rev 6.1 should be set to
Frequency: 750
Core Voltage: 1150-1200
Having it set to 600 is likely the reason its running at 4.8TH or lower than 6th/s.
Step 5
Scroll down.
Press save. You might see a warning popup. Press proceed anyway. Then press restart. The device should reboot and go to around 6TH/s.
Step 1
Visit the Dashboard.
Step 2
Press settings.
Step 3
Scroll down.
Step 4
Set new values.
Step 5
Scroll down.